Travels With Miranda

Okay, so I sort of lied this morning in that I am thinking about departure, but not in an, “OMG THERE’S SO MUCH TO DO!” mode, rather in a “Let’s see if I can make this departure thing even easier” mode.

I’m going around the rig and putting things where they belong. Whatever else is out is stuff that I would put on the bed in the back or in one of the sinks when I travel. I eliminated the sink storage by adding storage near the bathroom vanity and with a new kitchen cabinet.

The study isn’t too bad, really. I rearranged my overhead cabinets (AGAIN) to eliminate the basket on the desk and the computers go into their cases and storage place on travel day. All that was left were the keyboard, which is destined to always travel on the bed, and the garbage bucket, which fits neatly on one corner of the desk and usually remains there during travel:

Why bother coming up with a way to secure it? It’s light, so if it moves, no big deal, it won’t damage anything. But what if I forget to empty it before I take off? Why not eliminate having to think about it?

All it took was a cup hook:

Incidentally, this garbage bucket is a good example of a multi-use item since I use it to hold my cleaning solution when I wash the cabinets or the floors.

Getting the inside ready for departure is at most a 10-minute deal now and I think I can cut that down even further with added tweaks.

The next challenge is the kitchen cubbies. I put some non-skid material under them, but still have to figure out a way to keep the drawers from opening without running the unit or making it fiddly. At this point, I’m thinking bungee cords, which is not ideal, but I’m tired of having to turn the unit around to face the wall when I travel, especially since I usually forget to do that and have a mess on my hands when I arrive. I tried to eliminate them from the kitchen, but they are just too useful and so I am left with finding a better way to make them work in travel mode.

A good home is never done…

I can’t believe I was hesitant about painting the new wall yellow. It now feels like a proper room in here!!!

I definitely need another two coats on everything.

Now, the solenoid project. As a refresher, the solenoid is what allows an RV house battery to be charged by the RV truck alternator when the RV engine is running. Mine has worked intermittently but recently failed completely.

L and his buddy B came over this afternoon and I knew immediately that my rig was in good hands because it was obvious that they knew what they were doing!

We started by testing if the solenoid would click when the key was turned to the on position. Nope. It was time to get a look at the dang thing.

Pulling the battery and getting to the solenoid required three sizes of socket wrenches. It also took two strong men to pull the battery out. Definitely not a job for me. I don’t even own socket wrenches!

Once they could get to the solenoid, they jiggled some wires, connected the battery via my heavy duty super long jumper cables, and had me turn the engine on. Click. But nothing was happening in the house.

They decided to pull the solenoid to clean the contacts. That done, we hooked it up to the battery and tested it. Click.

Next test was to check the voltage coming in from the house to make sure the problem was not at the battery bank end. 13.8V.

Next test was to check the resistance in the solenoid. Ooh… massive amounts of it. But the more we made the thing click, the less resistance there was and we finally got resistance down to almost 0. There was no way that thing was going back into my RV, not with how iffy it was and hard to get to.

So I was sent to town with the old one to find a new one. I went to O’Reilly’s auto parts and the guy at the counter knew exactly what I needed and they had one in stock. I almost fainted when he told me the cost was $50.14. The budget’s really tight this month but you got to do what you got to do. The cashier laughed when I handed him exact change. “Not fifty, fifTEEN.” As in it was a $15.40 part. WOW!!!!!!!!!!!!!!

This is my old solenoid:

The new one is identical except it’s shinier.

I got it home and made L test it before B installed it. Everything looks good on the engine side, but nothing’s happening on the house side. We think it’s because the alternator recognizes that the house batteries are full.

I am going to use a lot of power tonight once the solar cuts out (my rig needs vacuuming…) and then try the engine. If I don’t see any results, then all three of us are at a loss, and two of us are engineers! But we are optimistic!

I had to two regular Buds in the fridge and one Bud light, so we had a cold one once the hood was closed. Retired friends make for cheap labour!

Croft, I know you’re waiting with bated breath for news of this project, so I will report ASAP once I do the test tonight. We’ve still got about two hours of daylight left.

I gained a lot of counter space when I removed my dishwasher, but I really didn’t need that much more. What I needed was a cabinet to hold all the stuff that’s normally on the counter and which has no other home. So when I travel, that stuff ends up filling the sink, making using said sink a pain.

The problem was finding a cabinet that would fit into the awkward space between my stove and window. And I only just realised that I forgot to grab a before shot. Doh. This is the best I can do:

I needed something that would be about 12″ wide, about 25″ high, and no more than 12″ deep. It also had to fit around the window valance as I did not want to have to mess it up.

I spent quite a bit of time on the Ikea website then at stores looking at the buildable furniture. I was resigned to making something myself when I found the perfect compromise on the Target website:

This design would allow me to cut down the top part of the cabinet to fit it into the space while still having a good sized cabinet with a door.

Now, I knew that this was going to be a cheap particle board item that wouldn’t age well, but for the price, it was worth having it even for a short while. You can buy this item in a white version in store, but to get the espresso, you have to buy online. I thought the espresso colour would look nicer against my cabinets than attempting to paint white laminate.

Particle board isn’t an easy thing to cut cleanly, but I was able to do an excellent job of it:

The vertical cut isn’t as clean because I started and stopped with the saw while the horizontal cut was made in one motion.

To cut the particle board, I put a layer of tape over the area I wanted to cut, then I used a straight edge and a sharp blade to score through the laminate layer. I then sawed through using my jigsaw and a 10TPI blade. 20TPI is recommended for laminated particle board, but I forgot to grab one last night and the 10TPI did a good enough job.

It took a bit of fussing to get all my pieces cut to fit the hole since nothing was plumb and square. Interestingly enough, the counter I installed is perfectly level while the upper cabinets are not! Go me!

The area around the valance looks silly:

If I was working with high quality cabinetry (that I would have willingly paid for had I found something the right size), I would have probably cut down the valance and attached the curtain rod to the cabinet. But since this is a vantage point very rarely seen, I will be happy to close the gaps with a little trim.

Once I was happy that all the pieces would fit in the space, I assembled the cabinet, using glue in addition to the screws. I then moved the cabinet into place and mounted it with one bracket screwed into the wall and by screwing the base of the cabinet directly into the counter.

Valance area not withstanding, it looks pretty good!

The cabinet came with a crappy black plastic pull. I used one of my nice pulls that matches the rest of my cabinetry. That involved having to drill new holes into the door but, thankfully, the ends of my pull cover the original holes. I think that pull makes all the difference!

The inside of the cabinet has a moveable shelf. I did not use the top part of the cabinet, so I cut it down to make myself a second shelf in case I ever need it:

If you squint, you can see the roller catch I installed for the door (just below the shelf). The door came with a pretty strong magnet catch, but magnet catches aren’t good enough in an RV. The roller catches have never failed me.

I am going to look for some baskets to fit into the top portion to hold spices. I had thought to put a dowel across to hold whatever, but I don’t think there is enough space to put a dowel and still give me room to pull things in and out. The right baskets will make that space look really nice and hide the awkward valance area.

Everything but the pepper mill fits!

I could move the shelf up a notch to fit in the pepper mill, but then the other items on the top shelf won’t fit. The pepper mill can travel while stored at an angle!

Standing in the entrance looking at the cabinet:

And the ugly side:

I’m not sure yet what I’ll do to cover the hole in the counter (used to be a cup holder). Suggestions?

I’m really pleased with how well this project came together and how much better it looks than I would have expected!

Tomorrow, I am going to use another piece from the same collection to make some improvements in the study.

I have to confess that I became addicted to Dollar Tree stores when I was in the US last year. I’m not one of those crazy people who buys random stuff just because it’s cheap, but they do have a lot of really good products that I actually need. In fact, I’m still going through my stash of waste bags that I bought expressly for emptying the litter box, buying enough so that I could scoop twice a day and have enough bags for a year. That investment was all of two or three dollars.

So when I saw a Dollar Tree by the Walmart in Minot, I ambled over after dinner to see if I could get the things on my list:

a) A new pair of nitrile-coated gardening gloves, which are awesome for hooking and unhooking the toad as they are warm, but water proof, and easy to slip on:

My last pair was pink and my current pair is green. Stock image because they are filthy.

b) A slightly bigger basket for the produce. I had bought a black one last year:

And think that this slightly bigger pink one fits in better with my decor (although it’s a bit too hot pink):

c) A tiny waste container for the dressing room into which I could put cotton swabs, band-aids, lysol wipes, etc. without having anything on the floor. This yellow bucket was perfect:

I also picked up a couple of food items, including honey graham crackers, that I haven’t been able to find anywhere else, and a bath sponge. The cashier said to me, “Did you find everything you were looking for? And maybe some extras?” I don’t think that he believed me that everything but the honey-mustard chips were on the list! And as for the chips, I’m addicted to mustard, okay?

I can’t believe I haven’t posted in a week. It feels like today is last Monday. I went out Monday afternoon to get some electrical supplies for the rig, and came home to a pile of transcription that hasn’t let up. I still have another nine or ten hours of work to do today (and it’ already 2:30 PM). The last week has been typing, an attempt to sleep, typing, working my day job, typing, an attempt to sleep, typing, working my day job, typing… well, you get the picture.

During my sanity breaks, I’m making a list of what absolutely needs to be done in the rig before I move back in and how I can break that stuff down into short segment of times. I know I can’t rely on having whole days available to me in the next month, so I need to start using up those precious little hours between my day job and my evening work, at least when the weather is good. This weekend would have been too cold to work in the rig anyway.

On the list:

STUDY

-add a 120V outlet and a 12V outlet  (all materials have been purchased)

-paint the non-matching woodwork in the study the same colour as the wardrobe doors and kitchen cabinets

-apply two more coats of green

DRESSING ROOM

-finish the trim

-remove the cloth dresser and replace it with a storage ottoman (probably not going to happen right now)

FRONT ROOM

-do two more coats of yellow

-run an extension cord or wiring permanently from the inverter to the study

The electrical work is all top priority. This will be my first time facing boondocking with the need to have my full computer set up, with my kazillion peripherals, not just my laptop, so I need easy and secure access to my inverter.

That’s all I have time to post. Hopefully, I’ll have something interesting in the next couple of days.